Download thesis PDF - TSpace - University of Toronto An experimental study was performed to understand the atomization process in the specialized printing method which consists of the hh frequency oscillating motion of a needle and a micro air jet. Validation cases include a liquid jet in a cross-flow, an airblast atomizer, and a hh shear fuel nozzle. secondary breakup models were evaluated in this thesis.
Desn of a liquid fuel injector for alternative fuel studies Hy viscous liquids, such as glycerin and acrylic paint were successfully printed with this printing method within the line width of 1 mm. This Honors Thesis is brought to you for free and open access by the Student. Nukiyama-Tanasawa plain-jet airblast atomizer left and.
Effect of heating and ionization of four atomizing. - UKnowledge Hh-speed imaging que was used to observe the evolution and mechanical perturbation of a liquid meniscus which is coated on the oscillating needle. This Master's Thesis is brought to you for free and open access by. Schematic of the setup of a typical air-blast atomizer that takes advantage.
Atomization and mixing performance of swirl-venturi lean direct. Fuel injector set conditions involving fuel injector pressure, fuel temperature and ambient pressure are varied in order to compare each fuel type. This thesis is available at Iowa Research Online Follow this. The swirl number varied from 0.58 to 1.0 and air-to-liquid ratios from.
Osd.mil Performance of fuel injectors affects the combustion efficiency, pollutant emissions and combustion instability in gas turbine engines, internal combustion engines and industrial furnaces. Northern Hemisphere Atlas of 1-Minute Rainfall Rates. Air Force Survey, Air Force Systems. Master of Science Thesis – University of Illinois at Urbana.